audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing knock sensor 1G61 > < Ignition system - exploded view

A3 Mk2

Removing and installing ignition coils with output stages
Removing and installing ignition coils with output stages
Special tools and workshop equipment required
   
t  Puller -T40039-
Removing:
–  Release electrical connectors at all ignition coils and unplug all connectors from ignition coils simultaneously.
  W00-1303
–  Using puller -T40039-, pull all ignition coils out of spark plug holes.
Installing
–  Fit all ignition coils loosely into spark plug holes.
–  Align the ignition coils with the connectors and attach all connectors onto ignition coils simultaneously.
–  Press ignition coils onto spark plugs by hand with uniform pressure (do not use any tools).
  N28-10011

Removing and installing knock sensor 1G61 > < Ignition system - exploded view