–
| Connect remote control -V.A.G 1348/3 A- with adapter cable -V.A.G 1348/3-3- to contact -1- using a test lead from auxiliary measuring set -V.A.G 1594C-. |
–
| Tape off 2nd connector contact of the adapter cable -V.A.G 1348/3-3- with insulating tape -arrow- to prevent short circuits. |
–
| Connect contact -5- to the body (earth) using a test lead from auxiliary measuring set -V.A.G 1594C-. |
–
| Connect crocodile clip to positive (+) terminal of battery. |
–
| Press remote control button. |
l
| Pump should start running audibly. |
Note The fuel pump runs very quietly. Where possible, avoid noisy surroundings for this test. |
|
|
|