audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing fuel pressure regulating valveN276 > < Removing and installing throttle valve moduleJ338

A3 Mk2

Checking fuel pressure regulating valveN276
Checking fuel pressure regulating valve -N276-
  WARNING
t  Always observe rules for cleanliness and instructions for working on fuel system → Chapter.
t  Follow these instructions and rules for cleanliness before starting work and while working on the fuel system.
–  Remove engine cover panel → Chapter.
   
–  Detach fuel return line -2-.
  A23-10427
–  Seal off the open return line connection with a plug -1-.
–  Attach a suitable hose -3- to return line -2-.
  A23-10438
–  Hold this hose -1- in a suitable container -2- to measure the return flow rate.
–  Start engine and let it idle.
l  Specification: 100 ml (+/- 10 %) in 30 seconds
If specification is not obtained, fuel pressure regulating valve -N276- is defective.
If it is not possible to start engine, perform test at starter cranking speed.
l  Specification of return flow rate: 0 ml
If specification is not obtained, fuel pressure regulating valve -N276- is defective.
  A23-10320

Removing and installing fuel pressure regulating valveN276 > < Removing and installing throttle valve moduleJ338