A3 Mk2
Exploded view of electromechanical steering box (generations 1 and 2) |
1 - | Universal joint |
2 - | Bolt |
q | 20 Nm + turn 90° further |
q | Always renew if removed |
3 - | Electrical wiring |
4 - | Power steering box |
q | Different versions; for correct version refer to → Electronic parts catalogue |
q | With power steering control unit -J500- |
q | Can be checked in „Guided Fault Finding“ with vehicle diagnosis, testing and information system -VAS 5051B- |
5 - | Wheel bearing housing |
6 - | Nut |
q | All vehicles except S3 and RS 3: 20 Nm + turn 90° further |
q | S3: Pre-tighten to 100 Nm, slacken 180° and then tighten to 100 Nm |
q | RS 3: 110 Nm |
q | Self-locking |
q | Always renew if removed |
7 - | Subframe with suspension brackets |
8 - | Bolt |
q | 50 Nm + turn 90° further |
q | Always renew if removed |
9 - | Clamp with nuts |
q | Not fitted on vehicles with generation 3 steering box |
q | Removing and installing → Chapter |
q | Always renew if removed |
10 - | Heat shield |
11 - | Torx bolt |
q | 6 Nm |