audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing poly V-belt pulley with free-wheel > < Checking carbon brushes - Valeo alternator from 2007 onwards

A3 Mk2

Removing and installing poly V-belt pulley without free-wheel
Removing and installing poly V-belt pulley without free-wheel
Special tools and workshop equipment required
   
t  Socket -3310-
t  8 mm hexagon socket or TORX T50 socket
  W00-0299
Removing
–  Remove alternator → Electrical system; Rep. gr.27.
–  If fitted, press off protective cap on alternator pulley.
–  Counterhold on securing nut using socket -3310- and turn alternator shaft clockwise to loosen.
–  Detach poly V-belt pulley.
Installing
Installation is carried out in the reverse order; note the following:
–  Turn alternator shaft anti-clockwise to tighten.
–  Clip protective cap onto alternator pulley.
Tightening torque
  N27-0096
ComponentNm
Poly V-belt pulley to alternator65

   

Removing and installing poly V-belt pulley with free-wheel > < Checking carbon brushes - Valeo alternator from 2007 onwards