A3 Quattro L4-2.0L Turbo (CBFA) (2009)
6 - Lock cylinder
‹› Removal => [ Removing lock cylinder ]
7 - Door handle
‹› Before disassembling, remove window frame and window regulator.
‹› Removal => [ Door Handle ] See: Front Door Handle/Front Door Exterior Handle/Service and Repair/Front Door Handle.
8 - Actuating lever
9 - Clip
‹› Engage operating rod in clip, swivel clip 90° and engage at operating rod.
Removing lock cylinder
-
Open driver side door.
-
Pry out cover cap - 2 -.
-
Turn Torx bolt - arrow - counter-clockwise until it stops.
-
This moves the arm - 1 - toward rear and releases lock cylinder.
-
Remove lock cylinder from door handle.