A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-1839001.png)
Hood Weatherstrip: Service and Repair
Hood Seal
1 - Lock carrier seal
‹› Position seal at center on lock carrier (note center marking) and slide onto flange at lock carrier and fender at side.
2 - Left sealing profile
‹› Self-adhesive
‹› Before installing, adhesion surface must be free of dust and grease.
‹› Pull off protective paper and press on seal firmly.
3 - Plenum chamber seal
‹› Bring molded part - arrows - into contact and press seal onto flange from above, working from outside toward inside.
4 - Right sealing profile
‹› Self-adhesive
‹› Before installing, adhesion surface must be free of dust and grease.
‹› Pull off protective paper and press on seal firmly.
