A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Front Fender Liner: Service and Repair
Front Wheel Housing Liner
Front Wheel Housing Liner
1 - Fender
2 - Sheet metal screws
‹› 2 Nm
3 - Metal screw
‹› 2 Nm
4 - Rear section of front wheel housing liner
‹› Remove Torx bolts - 2 - and - 3 -, gently press wheel housing liner together and remove.
5 - Front section of front wheel housing liner
‹› Pay attention to the cut-out in vehicles with an auxiliary heater=> [ Vehicles equipped with an auxiliary heater ].
6 - Spring nut
‹› Slid onto wheel housing liner from side.
Vehicles equipped with an auxiliary heater