A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Support driveshaft at the tunnel support with a wood block.
-
Move rear driveshaft tube as far as possible in direction of transmission.
CAUTION!
Before loosening subframe bolts, secure vehicle against tipping over (e.g. load luggage compartment with approximately 50 kg).
-
Place engine/transmission jack (VAG 1383 A) with universal transmission support (VAG 1359/2) below subframe and secure with strap.
-
Remove hex bolts - 1 - and - 2 -.