A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Remove bolts - 4 - and remove steering column adjustment handle - 3 -.
-
Remove bolts - 1 -, - 2 - and - 5 -
-
Remove lower part of steering column trim.
Installing
Installation is reverse of removal, but note the following:
-
First install lower part of trim and then handle.
-
Then hook front of upper part of steering column trim into lower part - arrow 1 -.
-
Make sure the pin in the lower steering column trim engages into the cut-out in the tab on the upper steering column trim - arrow 2 -.
‹› Shown on removed steering column trim in illustration.
-
Engage gap cover on instrument cluster.