A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Seat Heater: Service and Repair
Bonded Seat Heating Element
Bonded Seat Heating Element
Removing
-
Remove front seat:
‹› Manual seat => [ Front Manual Seat ] See: Service and Repair/Removal and Replacement/Front Manual Seats
‹› Power seat => [ Power Seat ] See: Service and Repair/Removal and Replacement/Power Front Seats
-
Remove backrest:
‹› Manual seat => [ Backrest ] See: Service and Repair/Removal and Replacement/Front Manual Seats
‹› Power seat => [ Backrest ] See: Service and Repair/Removal and Replacement/Power Front Seats
-
Remove cover and padding from seat pan.
-
Cut wire - 2 - off of old heating element - 1 -.
Installing
Installation is reverse of removal, but note the following:
-
Align heating element on seat surface, remove protective foil and glue heating element to cushion.
-
Insert the electrical wire - 2 - into the gap - 3 -.
-
Route connecting wires at locations - 4 - in bottom of gaps, avoiding crossover.