A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Set retaining spring - arrow - into brake caliper housing.
CAUTION!
‹› After installing in both holes, the retaining spring must be pressed under the brake carrier. If improperly installed, the wear of the
outer brake pad cannot be adjusted, thereby increasing brake pedal travel.
‹› After installing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly
seated in their normal operating position.
-
Check brake fluid level, and fill if necessary.
Tightening specification