A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-409009.png)
-
Clean sealing surfaces, must be free of oil and grease.
-
Cut tube nozzle at front marking (jet dia. approximately 2 mm).
-
Lubricate the running surfaces of both camshafts.
-
Place the camshaft into the cylinder head; the recesses - arrows - must be perpendicular to each other.
-
Replace the cylinder head cover bolts.
-
Apply the silicone sealant on the clean sealing surface of the cylinder head cover as shown in the illustration - arrows -.
