A3 Quattro L4-2.0L Turbo (CBFA) (2009)
‹› With O-rings
7
Oil filter element
‹› Remove and install using Oil Filter Wrench (3417)
8
Bolt
‹› 15 Nm
9
Connection
10
Seal
‹› Replace
11
Engine oil cooler
‹› See note, refer to => [ Oil Pan and Oil Pump ] See: Oil Pan/Service and Repair/Oil Pan, Upper Section
‹› Ensure sufficient clearance to surrounding components
‹› Coolant hose connection diagram, refer to => [ Coolant Hose Connection Diagram ] See: Cooling System/Diagrams
‹› Removing and installing, refer to => [ Engine oil cooler, removing and installing ] See: Oil Cooler/Service and Repair/Engine oil cooler,
removing and installing
12
Gasket
‹› Replace
13
Bolt
‹› Tightening order, refer to => [ Accessory Assembly Bracket Tightening Sequence ] See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Ribbed Belt Drive Assembly Overview