A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-468002.png)
‹› 9 Nm
8
Oil pump
‹› Removing and installing, refer to => [ Oil Pump ] See: Oil Pump/Service and Repair/Oil Pump
9
Centering sleeve
10
Chain tensioner
11
Bolt
‹› 9 Nm
12
Bolt
‹› Engine codes CDAA and CCZA only
13
Oil pressure regulation valve (N428)
‹› Engine codes CDAA and CCZA only
14
O-ring
‹› Engine codes CDAA and CCZA only
15
Drive chain for oil pump
‹› Mark direction of rotation before removing
16
Gasket
‹› Replace
17
Oil separator
‹› Removing and Installing, refer to => [ Oil Separator ] See: Powertrain Management/Emission Control Systems/Positive Crankcase
Ventilation/Oil Separator/Service and Repair
18
Bolt
‹› Tightening Sequence, refer to => [ Oil Separator Tightening Sequence ]
19
Oil pan (upper section)
‹› Removing and installing, refer to => [ Oil Pan, Upper Section ] See: Oil Pan, Upper Section
20
Bolt
‹› 9 Nm
21
Bolt
22
Suction line
‹› Clean strainer if contaminated
23
O-ring
‹› Replace
24
Gasket
25
O-ring
