A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Connect compressed air with at least 6 bar pressure.
-
Loosen stuck valve keepers using a Drift (VAS 5161/3) and a plastic hammer.
For the intake side
-
Install the Engaging Device (VAS 5161/6) with the Installation Fork (VAS 5161/5) in the center threads of the Guide Plate for FSI Engine (VAS
5161/19B).
-
Insert the Installation Cartridge (VAS 5161/8 ) in the Guide Plate for FSI Engine (VAS 5161/19B ).
-
Engage the Pressure Fork (VAS 5161/2) on the Engaging Device (VAS 5161/6).
For the exhaust side
-
Install the Engaging Device (VAS 5161/6) with the Installation Fork (VAS 5161/5) in the outer threads of the Guide Plate for FSI Engine (VAS
5161/19B).