A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Position the lower section of the Valve Seal Removal Tool (3364) on the valve stem seal.
-
Place the drift - 1 - in the hole in the lower section of the removal tool.
-
Position the lever on the removal tool and remove the valve stem seal - arrow -.
Valve Stem Seals, Installing
-
Place plastic sleeve - A - on valve stem to prevent damage to new valve stem oil seals - B -.
-
Oil the sealing lip of valve stem oil seal - B -, insert into Valve Stem Seal Driver (3365) and carefully slide onto valve guide.