A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-478006.png)
‹› Press the Installation Cartridge (VAS 5161/8 ) onto the insertion device from above and capture the valve keepers.
-
Push the Assembly Cartridge (VAS 5161/8) down using the Pressure Fork (VAS 5161/2). Turn the knurled-head screw on the assembly cartridge
back and forth while pulling it upward at the same time.
-
Release the Pressure Fork (VAS 5161/2) with the knurled bolt pulled.
-
Remove the Valve Cotter Disassembly and Assembly Device (VAS 5161).
The rest of the assembly is basically a reverse of the disassembling sequence.
-
Camshafts, installing. Refer to => [ Camshafts ] See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Camshafts.
