A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-482003.png)
20
Guide pins
‹› 20 Nm
Pipe for the Balance Shaft - Installation Position
‹› The pin from the balance shaft pipe must fit into the groove - arrow -
Bearing Pins, Installation Position
‹› Replace and lubricate the O-ring - 1 -
‹› The alignment pin - arrow - for the bearing pins must engage in the hole in the cylinder block.
‹› Lubricate the bearing pins
Intermediate Shaft Sprocket Tightening Sequence
