A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Air Register: Service and Repair
Instrument Panel Vents
‹› Instrument panel vents - B - can only be removed and installed when control ring - A - stands in the "45° " position. Control lever of vent is
located only in this position so that vent can be removed and installed at instrument panel without being damaged.
‹› Instrument panel vents - B - can only be installed in a certain position, therefore not the position of the control ring - A - when installing.
-
Set control ring - A - of instrument panel vent - B - to be removed to "45°" position
-
Attach the Hook (3438) - A - to the back of the - C - instrument panel vent - B -.
CAUTION!
‹› So that instrument panel vent is not damaged when removed, Hook (3438) - A - must not be engaged on to fins of instrument panel vent -
B -.
-
Carefully pull the applicable instrument panel vent - B - out of instrument panel.