A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-2111005.png)
CAUTION!
Do not let fuel come into contact with skin.
‹› Wear protective eyewear and clothing when opening the fuel system.
‹› Lay clean cloths around the connection before opening the high pressure area to collect any fuel that leaks out.
-
Loosen the wire at a connection immediately.
‹› If the high pressure system is not opened immediately, the pressure will increase because of post-heating.
Final procedures
-
Insert Fuse 6 (on fuse panel F) (SF6).
-
Connect the Vehicle Diagnosis, Testing and Information System (VAS 5051B) while the ignition is switched off.
-
Start "Guided Functions" operating mode.
-
Generate the readiness code in the engine control module.
