A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-2142002.png)
Install in reverse order of removal, noting the following:
‹› In case of defective LEDs, the complete high-mount brake lamp must be replaced.
-
To install, pull all the latches - 2 - in - direction of arrow -, the spring - 1 - must be tensioned.
-
Connect the electrical connector and insert the high-mount brake lamp in the rear lid opening.
-
Press center high-mounted brake lamp into opening until retainers engage.
-
Install upper rear lid trim.
