A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Tail Lamp: Service and Repair
Side Panel Tail Lamps
Side Panel Tail Lamps
Removing
-
Switch off ignition and remove ignition key.
-
Turn light switch into "0" position.
-
Unclip plugs - 1 - from luggage compartment trim.
-
Remove nut - 2 -.
-
Remove the tail lamps from the inside - arrows -, while doing this, the tail lamps will come out of the clip nuts.
-
Disconnect electrical harness connector at lamp carrier.
Installing
Install in reverse order of removal, noting the following:
-
Install the tail lamps from the inside into the openings and press the clip nuts.
-
Tighten cap nut.
-
Insert plugs in luggage compartment trim.
Tightening Specifications