A3 Quattro L4-2.0L Turbo (CBFA) (2009)
-
Tightening Specifications, refer to => [ Subframe, Diagonal Brace, Transverse Links, Tie Rod and Level Control System Sensor Assembly
Overview ] See: Body and Frame/Frame/Subframe/Rear Subframe/Service and Repair/Removal and Replacement/Subframe, Diagonal Brace,
Transverse Links, Tie Rod and Level Control System Sensor Assembly Overview
-
Use special tool as shown.
-
After tightening nut - A -, check camber value once more. Refer to => [ Vehicle Alignment ] See: Specifications/Vehicle Alignment.