audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Engine Controls - Low Power/Won't Move After Stopping|Page 2389 > < Engine Controls - Low Power/Won't Move After Stopping|Page 2387

A3 Quattro L4-2.0L Turbo (CBFA) (2009)

Page 3
background image

The threads of the shear bolts - 4 - (that are not installed in ECM) are coated with a locking compound. For this reason, the threads must be heated
with the heat gun to remove both bolts.

The threads of both shear bolts - 3 - (that are installed in ECM) are not coated with a locking compound. The threads in the ECM housing must not be
heated and do not require to be heated (unintentional heating of the ECM).

Set adjustment on the heat gun as shown in the illustration, with the temperature potentiometer - 2 - set to maximum heat and the two-stage air flow
switch - 3 - set to level 3.

Engine Controls - Low Power/Won't Move After Stopping|Page 2389 > < Engine Controls - Low Power/Won't Move After Stopping|Page 2387