A3 Quattro L4-2.0L Turbo (CBFA) (2009)
All Vehicles
‹› A second technician is required to remove rear portion of exhaust system.
-
Remove rear mountings for the rear muffler and remove the rear portion of the exhaust system.
-
Remove heat shield - arrows -.
-
Place Engine/Transmission Jack (V.A.G 1383 A) under the subframe for support.
-
Place a block of wood - 1 - between Engine/Transmission Jack (V.A.G 1383 A) and subframe.
-
Remove rear bolts - arrows - at left and right of subframe.
-
Slowly lower subframe using engine/transmission jack (V.A.G 1383 A) until distance between subframe (left) and body achieves dimension - a -.