A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-668003.png)
‹› Dimension - a - = 45 to 50 mm.
-
Disconnect vent lines - 3 -, - 4 - and - 5 - by pressing release button.
-
Remove bolts - 1 -, - 2 - and - 6 -.
-
Release retaining tabs in direction of - arrow - with a screwdriver and remove the EVAP canister.
Installing
‹› Tightening specifications => [ EVAP Canister System/Leak Detection System Assembly Overview ] See: Service and Repair.
Installation is in reverse order of removal, note the following:
-
Connect ventilation lines until they engage audibly.
-
Install rear axle => Suspension, Wheels and Steering
42 Removal and Installation.
-
Install rear part of exhaust system => Engine Mechanical
