A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Seat Belt: Service and Repair
Seat Belt Latch Anchorage Point
Seat Belt Latch Anchorage Point
Removing
CAUTION!
Follow the safety precautions for pyrotechnic components.
-
Remove front seat:
‹› Manual seat => [ Front Manual Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Manual Seats
‹› Power seat => [ Power Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Power Front Seats
‹› Bucket Seats => [ Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Bucket Seat
-
Secure the seat on the fixture for seat repair ( VAS 6136). Refer to => [ Front Seat, Installing on VAS 6136 ] See: Body and
Frame/Seats/Description and Operation/Front Manual Seats.
-
If present, disconnect connector (black) under seat not shown in illustration for belt fastened detection warning tone.
-
Remove the bolt - 2 -.
-
Remove seat belt latch - 1 -.
Installing
CAUTION!
Follow the safety precautions for pyrotechnic components.
Installation is performed in reverse order of removal, noting the following.
-
Replace the seat belt latch bolt.
‹› Note that there are different tightening specifications depending on the seat version.