A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-1343002.png)
-
Remove left front level control system sensor coupling rod from the control arm, if applicable.
-
Position the transverse link bracket and mounting bracket on the left side of the vehicle with the locating pins (T10096 ). Refer to => [ Subframe
and Consoles, Securing ] See: Subframe/Front Subframe/Service and Repair/Procedures/Subframe and Consoles, Securing.
-
Remove nuts - arrows -.
-
Loosen bolt - 17 -.
