A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Stabilizer Bar: Service and Repair
FWD
Stabilizer Bar
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1331)
Removing
-
Remove rear wheels.
‹› The following work steps are described for the left side of the vehicle. These work steps also apply simultaneously for right side of vehicle.
-
Remove nut - 1 - and pull coupling rod - 2 - out of stabilizer.
-
Remove bolts - arrows - for stabilizer clamp.
-
Remove stabilizer.
Installing
Installation is in reverse order of removal, with special attention to the following:
‹› => [ Subframe, Diagonal Brace, Transverse Links, Tie Rod and Level Control System Sensor Assembly Overview ] See: Subframe/Rear
Subframe/Service and Repair/Removal and Replacement/Subframe, Diagonal Brace, Transverse Links, Tie Rod and Level Control System Sensor
Assembly Overview