A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-1408004.png)
-
Place trailing arm on wheel bearing housing with bolts - arrows - but do not tighten yet.
-
Install coil spring. Refer to => [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension/Coil Spring.
-
Tighten bolts - arrows -.
-
Tighten coupling rod - arrow - on trailing arm.
-
Install cover plate.
Bolting at wheel bearing housing may occur only when dimension "a" has been obtained. Refer to => [ Rear Axle in Curb Weight Position ] See:
