A3 Quattro L4-2.0L Turbo (CBFA) (2009)
Constant Velocity Joint: Service and Repair
Drive Axle with 100 mm Inner CV Joint
Drive Axle with 100 mm Inner CV Joint
Special tools, testers and auxiliary items required
‹› Thrust Plate (VW 401)
‹› Thrust Plate (VW 402)
‹› Punch (VW 408 A)
‹› Punch (VW 411)
‹› Sleeve (VW 416 B)
‹› Thrust Pad (VW 447 H)
‹› Circlip Pliers (VW 161 A)
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
‹› CV Joint Boot Clamp Tool (V.A.G 1682)
‹› Assembly Tool (T10065)
Disassembling CV Joint
Removing Outer Constant Velocity Joint
-
Drive constant velocity joint off drive shaft by hitting forcefully with a light alloy hammer.
Removing and Installing Circlip