A3 Quattro L4-2.0L Turbo (CBFA) (2009)
/Page-854005.png)
-
Apply sealant -hatched area- to clean cover surface.
‹› Sealant bead: Unbroken, 2 to 3 mm in diameter. Skirt area around inner holes - arrow -.
-
Align new cover with bolts - arrows - to bolt holes.
Cover must be aligned exactly because it cannot be aligned after driving on.
-
Drive cover on with a plastic hammer.
-
Wipe away any sealant leaking out.
Ventilating Rubber Protective Joint Boot
