audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Cabin Ventilation Grille > < Rear Bumper Cover / Fascia|Service and Repair|Page 8712
Page 1
background image

Cabin Ventilation Duct: Testing and Inspection

Air Extraction Vent, Checking

-

Check ventilation channels to both ventilation frames - A - in luggage compartment (left and right) for throughput.
-

Sealing lips - B - in ventilation frames - A - must move freely and close by themselves.

-

Blocked channels to ventilation frames or jammed sealing lips may cause windows to fog up.

NOTE:

-

In this illustration, ventilation frame - A - is depicted with rear bumper removed.

-

For forced air extraction, one ventilation frame - A - each is installed on left and right.

-

So that sealing lips - B - close correctly, ventilation frame - A - must be installed on proper side (smaller radius - C - at top).

-

In order for the passenger compartment ventilation to function properly, the vent openings - A - and - B - in the luggage compartment trim on left
and right must not be closed.

Cabin Ventilation Grille > < Rear Bumper Cover / Fascia|Service and Repair|Page 8712