A3 Quattro V6-3.2L (BUB) (2008)
/Page-2908002.png)
Lid Hinge
-
Pull off gas-filled strut at hinge-side ball head pin.
-
Remove ball stud - 1 -, hex bolt - 2 - and hex nut - 5 -.
-
Replace seal - 4 - when reinstalling hinge.
-
When installing, tighten ball stud, hex bolt and hex nut to 21 Nm.
-
Adjust the engine compartment lid => [ Rear Lid Adjustment ] See: Adjustments.
