A3 Quattro V6-3.2L (BUB) (2008)
6 - Bolt
‹› 70 Nm plus an additional 90° turn
‹› Always replace after removal
7 - Bolt
‹› 70 Nm plus an additional 90° turn
‹› Always replace after removal
8 - Left Front Level Control System Sensor (G78) and Right Front Level Control Sensor (G289)
‹› Removing and Installing, refer to => [ Front Level Control Sensors ] See: Sensors and Switches/Sensors and Switches - Steering and
Suspension/Sensors and Switches - Suspension/Ride Height Sensor/Service and Repair/Removal and Replacement/Front Suspension
9 - Hex head bolt
‹› 9 Nm
10 - Diagonal Brace
‹› Only on Cabriolet
‹› The contact surfaces must be free of wax
‹› Removing and Installing, refer to => [ Diagonal Braces ] See: Front Suspension/Diagonal Braces
11 - Bolt
‹› 90 Nm plus an additional 45° turn
‹› Always replace after removal
12 - Bolt
‹› 90 Nm plus an additional 45° turn
‹› Always replace after removal
13 - Transverse Link
‹› Different versions of the transverse link are offered (cast steel - sheet steel).
‹› Replace with ball joint if damaged.
‹› Removing and Installing, refer to => [ Transverse Link with Mounting Bracket, Manual Transmission ] See: Steering and
Suspension/Suspension/Control Arm/Service and Repair/Removal and Replacement/Front Suspension/Transverse Link With Mounting
Bracket, Manual Transmission.
‹› Removing and Installing, refer to => [ Transverse Link with Mounting Bracket, DSG or Automatic Transmission ] See: Steering and
Suspension/Suspension/Control Arm/Service and Repair/Removal and Replacement/Front Suspension/Transverse Link With Mounting
Bracket, DSG or Automatic Transmission.
‹› Replacing bonded rubber bushing, refer to => [ Transverse Link Bonded Rubber Bushing ] See: Steering and Suspension/Suspension/Control
Arm/Service and Repair/Removal and Replacement/Front Suspension/Transverse Link Bonded Rubber Bushing.
14 - Nut
‹› 60 Nm
‹› Always replace after removal
15 - Ball Joint