A3 Quattro V6-3.2L (BUB) (2008)
-
Press in mounting onto stop, and until force of 20 Nm is reached.
-
Remove assembly tool T10244 from subframe and check seating of pressed in bonded rubber bushing.
^
Cutouts in bonded rubber bushings must be in center of subframe opening.
^
The top and bottom of the bonded rubber bushing may project 2 mm above the edges of the subframe in the area of the opening for the
pendulum support.
^
Gap -arrow- between bonded rubber bushings is permissible.
-
Install subframe.