A3 Quattro V6-3.2L (BUB) (2008)
-
Front ashtray - 6 - installed.
-
Clip in storage compartment cover - 3 -.
-
Clip in storage compartment trim - 8 -.
-
Install Climatronic Control Module J255 (A/C control head).
-
Grab handle installed.
-
Clip in front storage compartment cover - 2 -.
4
-
Screws - 3.5 Nm
-
Qty. 2
5
-
Omega clips
-
Qty. 2
-
Maintain installation position as shown in illustration
6
-
Front ashtray
Removing
-
Unclip front storage compartment cover - 2 -.
-
Unclip trim panel - 8 -.
-
Unclip storage compartment cover - 3 -.
Vehicles with manual transmission:
-
Remove cover with selector lever boot.
Vehicles with automatic transmission:
-
Version I: Remove selector lever cover.
-
Version II: Remove selector lever boot and cover.
All:
-
Remove bolts - 4 - (qty. 2).
-
Remove omega clips - 5 -.
-
Remove ashtray - 6 -.
Installing
Maintain the following assembly sequence:
-
Insert ashtray - 6 -.
-
Position omega clip installation position - 5 -.
-
Install screws - 4 - and tighten to specified torque.
-
Clip in storage compartment cover - 3 -.
-
Grab handle installed.
-
Clip in storage compartment trim - 8 -.
-
Clip in front storage compartment cover - 2 -.
-
Clip in shift mechanism cover.
7
-
Center console
8
-
Storage compartment trim
Removing
-
Remove heater controls or remove Climatronic Control Module J255 (A/C control head).
-
Unclip front storage compartment cover - 2 -.
-
Unclip storage compartment trim - 8 -.
Installing
Maintain the following assembly sequence:
-
Front ashtray - 6 - installed.
-
Storage compartment cover - 3 - installed.
-
Install Climatronic Control Module J255 (A/C control head).
-
Clip in storage compartment trim - 8 -.
-
Grab handle installed.
-
Clip in front storage compartment cover - 2 -.
9
-
Cover light lens
-
clipped into storage compartment trim - 8 -.