A3 Quattro V6-3.2L (BUB) (2008)
Trim Panel: Service and Repair
Lower A-Pillar Trim
Lower A-Pillar Trim
Special tools, testers and auxiliary items required
-
Special hook 3370
Removing and Installing
1
-
Lower A-pillar trim panel
Removing
-
Remove instrument panel cover.
-
Remove lower A-pillar trim - 1 - from clip - 9 -.
-
Remove lower A-pillar trim - 1 - from door sill molding - 8 - and plastic bracket - 6 -.
Installing
Installation is reverse of removal, but note the following:
NOTE: Replace damaged spring clips - 7 - and - 9 -.
-
Before installing lower A-pillar trim - 1 -, ensure spring clip - 7 - is positioned correctly.
-
When installing, ensure lower A-pillar trim tab - 1 - and door sill molding tab - 8 - engage.
-
After completing installation, stretch door sealing profile over lower A-pillar trim.
2
-
Bracket
-
Allocation
3
-
Screws - 2.5 Nm
-
Qty. 2
-
Allocation