A3 Quattro V6-3.2L (BUB) (2008)
-
The B-pillar trim adjustment handle must engage on belt height adjuster release lever - 2 - and pins - 1 -.
-
Slide B-pillar trim upward into molded headliner opening.
-
Both guide hooks must engage in holes on roof frame.
NOTE:
-
Function test after installing trim:
-
The height adjuster must audibly engage in each of the 5 possible positions.
-
The release button must spring back by itself after pressing.
-
Slide lower B-pillar trim guide pins - 2 - into holes on B-pillar and tighten trim bolts - 1 -.
-
Tighten lower three-point seat belt mounting point.
-
Install lower B-pillar trim.
-
Install sill panel trim.
-
Install lower A-pillar trim.
Tightening torques
Component.........................................................................................................................................................................................................................Nm
B-pillar trim to body........................................................................................................................................................................................................3.5(1)
Seat belt to body....................................................................................................................................................................................................................55