A3 Quattro V6-3.2L (BUB) (2008)
Seat Back: Overhaul
Cover, Right 2/3 Backrest Without Center Armrest, Separating From Cushion
Cover, Right 2/3 Backrest Without Center Armrest, Separating from Cushion
1
Upholstery
2
Fastening Strips
3
Plastic Clips
‹› Replace if damaged
4
Cover
Removing
-
Pry out grip channels - 2 - from plastic clips - 3 - using a screwdriver.
Installing
Installation is reverse of removal, but note the following:
-
Replace damaged plastic clips.