audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Control Module and Hydraulic Unit, Anti-Lock Brake Itt Mark 70 Assembly Overview|Page 5032 > < Control Module and Hydraulic Unit, Anti-Lock Brake Itt Mark 70 Assembly Overview|Page 5030
Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Control Module and Hydraulic Unit, Anti-Lock Brake/Electronic Stabilization Program Itt Mark 60
Assembly Overview

ABS Control Module and ABS Hydraulic Unit Assembly Overview

CAUTION!
If the brake line connections are interchanged, the ESP system will malfunction.

-

After fastening brake lines to hydraulic unit, perform the output check diagnosis. Diagnostic Operation System (VAS5051A)

‹› By performing the output check diagnosis, it can be determined if the line connections were interchanged.

1 - Brake line

‹› Hydraulic unit to left rear brake caliper

2 - Brake line

‹› Hydraulic unit to right rear brake caliper

3 - ABS hydraulic unit (N55)

‹› Location: In engine compartment, right

‹› Removing and installing => [ ABS Control Module and Hydraulic Unit ] See: Antilock Brakes / Traction Control Systems/Electronic Brake

Control Module/Service and Repair/ABS Control Module and Hydraulic Unit, Mark 60

4 - Bracket

Control Module and Hydraulic Unit, Anti-Lock Brake Itt Mark 70 Assembly Overview|Page 5032 > < Control Module and Hydraulic Unit, Anti-Lock Brake Itt Mark 70 Assembly Overview|Page 5030