A3 Quattro V6-3.2L (BUB) (2008)
Temperature Sensor (Gauge): Diagrams
Engine Coolant Temperature Sensor Multi-Pin Connector Assignments (BUB Or CBRA Engine)
Engine Coolant Temperature (ECT) Sensor G62
The Engine Coolant Temperature (ECT) Sensor G62 sits on front left of cylinder head.
-
Carefully release and remove 2-pin electrical connector - arrow -.
Terminal assignment of the 2-pin harness connector at Engine Coolant Temperature (ECT) Sensor G62
1. Wire connection from Engine Coolant Temperature (ECT) Sensor G62 to engine control module
2. Sensor ground (GND)
Engine Coolant Temperature (ECT) Sensor (on Radiator) G83
The Engine Coolant Temperature (ECT) Sensor (on Radiator) G83 sits on the bottom left of the radiator.
-
Carefully release and remove 2-pin electrical connector - arrow -.
NOTE: Ignore - item 1 - and - item 2 -.