A3 Quattro V6-3.2L (BUB) (2008)
Idler Pulley: Testing and Inspection
Ribbed Belt Pulley Without Freewheel, Removing and Installing
Ribbed Belt Pulley without Freewheel, Removing and Installing
Special tools, testers and auxiliary items required
‹› Socket (3310)
‹› 8 mm hex socket or TORX T50
Removing
-
Remove generator => Electrical Equipment 27 Generator.
-
If present, press the protective cap off the generator pulley.
-
Counterhold mounting nut using socket (3310) and rotate generator shaft clockwise to loosen it.
-
Remove ribbed belt pulley.
Installing
Install in reverse order of removal, observing the following:
-
Turn the generator shaft counterclockwise to tighten.
-
Clip protective cap onto generator pulley.
Tightening torque