A3 Quattro V6-3.2L (BUB) (2008)
/Page-751003.png)
-
Remove the bolts for oil pan/transmission - arrows -.
-
Loosen oil pan bolts - 2 - diagonally and remove.
-
Remove the oil pan, and if necessary loosen by applying light strikes with a rubber hammer.
Installing
‹› Tightening specifications, refer to => [ Oil Pump and Oil Pan Assembly Overview ] See: Service and Repair/Oil Pump and Oil Pan Assembly
Overview, => [ Oil Pan - Tightening Specifications and Tightening Sequence ] See: Service and Repair/Oil Pump and Oil Pan Assembly Overview
.
Installation is in reverse order of removal, note the following:
-
Carefully remove sealant residue on cylinder block.
CAUTION!
Risk of eye injury.
‹› Wear safety glasses.
-
Remove sealant residue on oil pan, for example with a rotating plastic brush.
-
Clean sealing surfaces so they are completely free of any oil or grease.
-
Cut tube nozzle at front marking (nozzle dia. approximately 2 mm).
