A3 Quattro V6-3.2L (BUB) (2008)
/Page-775002.png)
-
Pull transmission oil cooler coolant pipe bracket toward left.
-
Swing Secondary Air Injection (AIR) system hose bracket forward.
-
Remove bolt - arrow - at wiring harness bracket.
CAUTION!
Press coolant pipe in direction of coolant pump using pry bar when removing coolant thermostat housing so that is not pulled off.
-
Remove coolant thermostat housing - 2 - while pressing coolant pipe - 1 - toward coolant pump with pry bar.
Vehicles with engine code BUB:
