A3 Quattro V6-3.2L (BUB) (2008)
/Page-2399002.png)
-
Check both motors, which are being held in position by the bracket - A -. Make sure they are not loose. Insert a piece of foam into the inside of
the mounting points - F - on the bracket - A -.
Reinstall all removed components in the opposite sequence while observing the following:
-
Install the wiring harness so that it cannot come in contact with any moving parts (e.g. the actuating arm of the control motor).
-
Check DTC memory of A/C control head Climatronic Control Module (J255) and erase malfunctions displayed if necessary. Vehicle Diagnosis,
Testing and Information System VAS 5051 in "Guided Fault Finding" function.
-
Perform Basic Setting and output Diagnostic Test Mode (DTM) of A/C system and check DTC memory again. Vehicle Diagnosis, Testing and
Information System VAS 5051 in "Guided Fault Finding" function.
‹› In the event of problems with moisture in passenger compartment, additionally check recirculated-air door (must close completely).
