A3 Quattro V6-3.2L (BUB) (2008)
‹› To prevent the instrument panel shell from damage, instrument panel should be placed on a clean work bench which is covered with clean
cardboard.
-
Disengage lug - D - of Bowden cable sheath - E - and remove Bowden cable sheath from mount of base plate for heater controls.
-
Disengage ball on Bowden cable - F - from operating lever - G -
-
Disengage support bracket - A - of Bowden cable sheath - E - and remove Bowden cable sheath from heater guide - C -.
-
Disengage ball on Bowden cable - B - from temperature door lever.
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
Only install a Bowden cable which has not been kinked and can move easily in Bowden cable sheath.
-
Do not kink Bowden cable.