A3 Quattro V6-3.2L (BUB) (2008)
/Page-3400003.png)
Install in reverse order of removal, observing the following:
-
Mount half of the adapter ring - 3 - with the securing tabs onto the HID headlamp - 2 -.
‹› The securing tabs - 4 - and - 5 - must be inserted into the mounts.
-
Close the second half - 1 - until it engages audibly.
-
Connect the connector and insert the new HID bulb in the housing. Do not touch the glass bulb with bare hands.
‹› Installation location: The electrical connection faces down.
-
Install the front wheel housing liner => Body Exterior
66 Removal and Installation.
-
Connect battery. Required actions => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery, Engine
Compartment, Disconnecting and Connecting.
