A3 Quattro V6-3.2L (BUB) (2008)
Fuse Block: Service and Repair
5-Pin Relay Carrier
5-Pin Relay Carrier
Observe notes on contact corrosion => [ Contact Corrosion ] See: Power and Ground Distribution/Wiring Harness/Service Precautions/Vehicle
Damage Warnings.
Removing
-
Switch off ignition and remove ignition key.
-
Remove driver storage compartment => Body Interior
68 Removal and Installation.
-
Release retaining spring - 1 -.
-
Move the 5-pin relay carrier in - direction of arrow - and remove toward right from base mount.
-
Unclip fuse holder at 5-pin relay carrier.
-
Detach relays and control modules and then unclip appropriate relay carrier.
‹› Check the exact assignment of 5-pin relay carrier in the current wiring diagram.
Installing
Install in reverse order of removal, noting the following:
-
Install driver storage compartment => Body Interior
68 Removal and Installation.